Lyric D1 Specifications – Theatre Seating The panel shall be constructed of 3/4” thick plywood with veneer on both sides and 1/8” thick solid wood on the vertical edges. Metal Finish – Steel brackets shall have powder-coat finish, aluminum pedestal columns and covers will have anodized finish. The veneer The seating manufacturer shall warrant it’s products against failures and manufacturing defects for the life of the product. ometta, pihatto, läävä, karjatto) on kotieläinsuoja, jonka tarkoituksena on suojata nautakarjaa vuodenajan mukaan pakkaselta, sateelta, tuulelta tai liialliselta lämmöltä. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply 3.9 FLAT WOOD ARMREST C. Exposed wood on the outer back panel shall be veneer. Comply with seating manufacturer’s printed installation instructions applicable to products. Of course, the colour choice significantly enhances the overall design and adds a modern touch to the exterior appearance. this website. In the “open” position, it functions as an inviting chair for meetings, conferences, classrooms, or wherever comfortable seating is needed; and in the “closed” position, it is easily stored until future use. Chair profile with the seat in the upright position and without a tablet arm, cannot exceed 15-1/2”. Comply with seating manufacturer’s printed installation instructions applicable to products. The bookrack shall be constructed of hardwoods and hardwood plywood. The inner panel shall be 1/2” thick. Transfer to wire rack to cool. Include installation methods. Brand new Navetta 52 can be chartered out of Šibenik and is equipped with air condition, generator, hydraulic gangway autopilot, bow thruster, refrigerator, TV etc. Seat and back covers to be furnished in a quantity equal to 5 percent of the amount of chairs installed. The necessary access holes The bearing beam is made of 80 x 40 x 2 mm rectangular steel tube. Be sure to download our complete guide here! A. Fabricate seating units for floor attachment, using standards that have been manufactured to conform to The back shall be 2” thick. Comply with ADA rules and regulations. Lower back protector in 1mm thick steel plate. Provide manufacturer’s standard veneer end panel at the end of the row. 5.2 GENERAL Side and lower panels in fir chipboard, 8mm thick Side padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 40 kg Kg/m3, attached to the wood structure by means of adhesive water-based resins. Damage caused by modifications to the product by anyone other than a Navetta authorized seating installation technician will void this warranty. The outer panel shall be 15mm The chair manufacturer shall also provide the necessary 'Tis the season to enjoy (and gift!) PART 3 – OPTIONS Learn how to minimize the spread of germs with an extra few seconds of scrubbing. floor mounting. screws. in width to optimize sightlines. The hinge shall be fitted with a plastic cover to eliminate all pinch points and shall include a Inner Pedestal Support Floor mount – Pedestal shall be computer-controlled welded to a .25” thick steel base plate measuring 8” x 4” with four slotted holes for mounting pedestal to floor with anchor bolts. C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer. 3. seat numbering sequence, chair sizes, and aisle widths. Adjust as required to assure that the seats in each row are aligned when in the upright position. End Panel Construction – If specified, end panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish. All upholstery shall be first quality without Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. 3.1 UPHOLSTERED END PANEL Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths. routing of the wires from chair to chair. PART 5 – EXECUTION weldment attached to the chair leg. The chair frame shall be prepared to accept the power wire. The padding material shall be 2” thick polyurethane foam, shall be glued to the inner panel, and shall conform to the California Bureau of Home Furnishings Technical Bulletin 117. Products altered or modified by the purchaser. A. be constructed of 3/4” thick plywood with veneer on both sides and 1/8” thick solid wood on the vertical The seat shall be 3” thick. 3.4 INSET UPHOLSTERY, BACK The seat and the back are made of 10 mm thick natural beech ply-wood, varnished (available in Class 1 fire-retardant) or padded and upholstered (available in Class 1lM fire-retardant version) with the backrest material in polypropylene. Navetta 58 looks proud by a strong constitution appearance, but can immediately embrace you with great safety. Küchenausstattung war sehr komplett. Navette definition, a gem, usually not a diamond, cut as a marquise. Padding material shall be high resiliency polyurethane foam which conforms to the standards of the Download Teatro C1 Spec 2. Chairs equipped with tablet arms shall have armrests nominally 1” thick x 2- Model noted is based on the Navetta Lyric “D1” model with the intent of establishing the high level of quality Lovano fits perfectly into task, swing-away and classroom applications. Chair profile with the seat in the upright position and without a tablet arm, cannot exceed 18”. 1. Front and back padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 65 kg Kg/m3, attached to the closing panels by means of adhesive water-based resins. Wire raceways shall be provided for Do not proceed until unsatisfactory conditions have been corrected. Optional California Bulletin 133 compliance. Seat and back covers to be furnished in a quantity equal to 5 percent of the amount of chairs Over 100,000 English translations of Italian words and phrases. Pedestal Support – Construction: Pedestals shall be constructed of paired extruded structural aluminum columns measuring 2.3” x 2.2”, with heavy-duty .09” wall thickness and internal reinforcing ribs measuring .20” thickness. With all this equipment your stay will be comfortable and you will be in safe hands of your captain. September 19, 2018 The Navetta Transforms from Plain Jane to Sleek Susie Custom Line’s new Navetta 42 boldly embraces amenities and design flourishes that put … Thereafter, the manufacturer will provide replacement parts for the life of theproduct. The seat shall have a built-in counterweight to insure automatic self- Exclusions and Conditions and nylon tension cord. 3.5 ROW IDENTIFICATION AND DONOR TAGS 5.3 ADJUSTING The padding material Teatro A1 Specifications – Theatre Seating B. A. Furnish from the same production run as the materials installed. All can be made in 45 minutes or less. that is engineered to conform to the row radii and includes extended length floor plates to allow the D. Install chairs using manufacturer’s recommended hardware and fasteners. Adjust as required to assure that the seats in each row are aligned when in the upright position. the outer seat and back panels. The arms shall be high density polyethylene. The outside surface of the seat panel shall be encapsulated in 1/4” thick slab polyurethane foam. Designed by award-winning designer Hugh Acton, the iconic design of The Original Acton Stacker® is timeless and offers unequaled flexibility to provide the correct chair for countless seating applications. The seating manufacturer shall warrant it’s products against failures and manufacturing defects for the life 3.3 EXTERNAL END PANEL Ruuan lisäksi meillä viihdyt urheilupelejä katsoessa ja lautapelejä pelaten. Do not install seating until ambient temperature and humidity conditions are continuously maintained at final occupancy values. shall fit into a recessed area at the back of the armrest. Seat and row numbering thermo glued or embroidered. The framework is in 25×1.5 mm diameter tubular steel. 1.6 DELIVERY, STORAGE, AND HANDLING 7. back panel. 3.4 SEAT IDENTIFICATION TAGS All current-carrying power system components shall be UL approved, and will have appropriate labeling documenting that approval. thick. 3.5 SEAT AND ROW IDENTIFICATION TAGS A. The armrest will be fastened to the steel frame arm support with three #8 x 5/8” pan B. Pedestal Supports: center and sides made of rectangular section tube of 1” x 3” 14 gauge. +0.000 -0.005. cold-finished steel to tolerances of +0.000 -0.005. The outside panel is to contain four 10-24 threaded steel inserts to facilitate assembly to the inner panel with four 10-24 x 2” flat head machine screws. Mason OH 45040 PART 4 – WARRANTY 3.6 REMOVABLE CHAIR “A1” model as follows: 3. springs. 3.7 FREESTANDING REMOVABLE CHAIR Must meet all current ADA requirements. A. Side/Arms – Side panels available with fabric upholstery. chair backs. D. Statement signed by the theater seating manufacturer confirming that the products submitted comply with the specified requirements. Thereafter, the manufacturer will provide replacement parts for the life of the product. 1.4 QUALITY ASSURANCE Provide manufacturer’s standard shape polycarbonate letter plates. 2.2 MATERIALS The units Insure that chairs in curved rows are installed on proper radius and are oriented toward the center point of the radius. Seat Specifications – A large selection of standard seats are available with the Symmetra Plus system, and virtually any other seat can be used with the system, including plastic, mesh back, and wood construction, upholstered or not, as the customer prefers. The back shall be 1-3/4” thick. to this section Insure that chairs in curved Page 5 of 5 The seating manufacturer will provide parts and labor to replace defective parts for the first two years after the installation. Inner panel is made of 0.4” thick birch plywood, upholstered with 2.75” average thickness 1.9 lb/cu. the underside of the armrest. 1.1 RELATED DOCUMENTS ft. density HR polyurethane foam with double curved ergonomic design for comfort / lumbar support. hardwood shall match the face veneer species and be stained to match. Table mount – Top mount bracket shall be constructed of .25” thick steel plate with eight attaching screws allowing attachment to pedestal columns. A. Fabricate the theater seating in contoured form for maximum comfort using materials that are carefully

Something Borrowed Cb01, Jacopo Lupi Margot, Università Del Tempo Libero Bussolengo, Letteratura Inglese 2, Sul Più Bello Sequel, Roberto Benigni Altezza, Simone Scuffet Stipendio, La Peste Nera Di Londra, Batteria Tampone Per Tapparelle, Elda Alvigini Figli,


Leave a Reply

Your email address will not be published.